Digital Water Transformation

Telemetry and SCADA systems enable the real-time monitoring, control, and automation of water infrastructure from a centralized operations center. By continuously collecting data from sensors, pumping stations, storage tanks, and distribution networks, operators gain complete visibility into system performance, allowing for faster, more informed decision-making based on reliable operational data.

Typical Applications

Telemetry and SCADA solutions can be implemented across a wide range of applications:

Extraction Wells – Monitoring dynamic water levels, power consumption, flow rate, and pump operation.
Storage Tanks – Automatic level control and water distribution management.
Booster Pump Stations – Pump automation and energy optimization.
Water Distribution Networks – Monitoring pressure and flow rates, with early leak detection.
Drinking Water Treatment Plants – Comprehensive control of the water treatment process.
Wastewater Treatment Plants – Process automation and monitoring of critical operating parameters.
District Metered Areas (DMAs) – Water loss analysis and hydraulic balance monitoring.
Agricultural and Industrial Irrigation – Remote control of irrigation systems and pumping stations.

Before vs. After

Without Telemetry	With Telemetry & SCADA
Manual inspections	Continuous 24/7 monitoring
Reactive operations	Proactive operations
Slow incident response	Real-time alarms
Disconnected information	Centralized operational platform
Higher energy consumption	Automated energy optimization
Increased risk of failures	Predictive maintenance
Frequent field visits	Remote monitoring and control

Operational Impact

Organizations implementing telemetry and SCADA solutions commonly achieve:

Reduced water losses through faster leak detection
Lower energy consumption with optimized pump operation
Faster response to operational incidents
Higher infrastructure availability
Improved service reliability
Better operational visibility and decision-making
Increased asset lifespan
Enhanced regulatory compliance and reporting

Supported Technologies & Protocols

The platform integrates with a broad range of industrial devices and communication standards, including:

Modbus RTU / TCP
MQTT
OPC UA
DNP3
IEC 60870-5-104
SNMP
REST APIs
BACnet (project dependent)

Valves

Other categories

Valves

Other categories